Tailor-made soft-top roof cover, designed for the BMW Mini Convertible, otherwise known as the Mini Cabrio. Fits the R52 (2005 to 2008), R57 (2009 to 2015), and F57 (2016 onwards).
Our soft-top, tailored half cover has been designed to easily fit your vehicle. The cover is secured to your vehicle using padded ribs on the underside of the cover, that trap inside the closed doors. The cover cannot be removed without opening the car. A concealed magnetic fixing system holds the cover down between the rib locations.
Made from a Poly-Urethane-coated woven polyester, these covers are waterproof to provide protection from the outside elements. Regular treatment with a U.V. protectant is recommended.This cover is light GREY in colour.
A HIGH-QUALITY, IN-STOCK, CUSTOM-FIT ROOF PROTECTOR - PURCHASE YOURS TODAY!
We design and manufacture completely custom fit products. Our covers will only fit the vehicle they are specified for.
How is the half cover protected from theft?
The cover is secured to your vehicle using padded ribs on the underside of the cover. These are trapped inside the closed doors and trunk so that the cover cannot be removed without unlocking and opening the car.
Are these half covers waterproof?
Our half covers are made from a Poly-Urethane-coated woven polyester, and are waterproof. However, since the weather is unpredictable and harsh on anything fabric, we recommend regular cleaning and maintenance of your fabric roof protector to help preserve its colour and water-proofing ability. This is as easy as washing your car’s soft top: STEP 1 – use a gentle car shampoo; STEP 2 – apply a fabric protectant (Full instructions provided with your cover).
How should I store the cover?
The cover should be dried out before being stored in the storage bag.
Can I use my cover on a towed vehicle?
We do not recommend using a cover on a towed vehicle or an open trailer. In addition to the flapping of the cover on the vehicle's paint finish, road dirt and debris may become trapped between the cover and the finish, causing damage to your paint.
Will a half cover scratch my car?
None of the materials we use to make our covers will scratch your vehicle. However, it is important that the cover is used properly, i.e. used on a clean vehicle, and that the magnets sewn in to the edge of the cover to secure it down are not dragged in to place when installing or removing your cover.
Can I use my cover when it’s windy?
Our covers provide a snug fit on your vehicle, and attach via padded ribs trapped inside the doors, as well as magnets along the edge of the cover, so they will stay put under normal wind conditions. Like any fabric, a car cover is susceptible to the wind, and although these are relatively heavy covers that perform well in windy areas, storm and wind damage is not covered by our warranty.
Protecting from moisture?
Under normal usage our half covers protect your soft top from all sorts of weather, tree sap, dirt, stray cats and the like. We recommend checking for moisture under your cover regularly, and removing and “airing out” your soft top and cover. The time frame for this is dependant on local weather conditions and humidity in your area, so there is no hard and fast rule here. If moisture becomes trapped underneath the cover for too long it can result in mold and bacteria formation that can fog your paintwork, or create water spots. North American Custom Covers is not responsible for any damage resulting from the use or misuse of our half covers.
Can I use my cover on a wet vehicle?
We do not recommend using your cover on a wet vehicle for any more than a day or so, for the reasons given above in "Protecting from moisture?”
What if my cover freezes?
In very cold weather, if you have not taken the precaution to air out the cover regularly, it is possible a wet cover could freeze to your car. Do not remove your car cover if it has frozen to your vehicle – you risk damage to both the vehicle and to the car cover. The car cover must be thawed before removal. This process can be expedited by pouring warm water over the cover. Please take precautions as you remove the cover as any damage is not covered by our warranty.
Folding and storing your half cover
If you fold your half cover methodically, and in a tidy fashion, the cover if much easier to reinstall the next time.
Fold each side up onto the roof, and then fold the front and rear portion of the cover on to the roof. You now have approximately a 3 ft x 3 ft square. From one side, fold a third of the cover in to the middle, and then from the other side, fold the other third in to the middle. The cover can now be folded from front to back, to a size suitable for the storage bag.
The cover should be dried out before being stored in the storage bag for more than a day or so, to prevent the build up of mold if the cover is folded when wet.
Do you supply a product warranty?
All our products come with a 6 month warranty against manufacturer defects. Should you notice a manufacturing fault, please contact us immediately to arrange a return / replacement. Usage of our half covers is at the sole risk and discretion of the user. North American Custom Covers is not responsible for any damage resulting from the use or misuse of a car cover.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.